请帮忙将以下内容翻译成英语.谢谢!急需

Answer 1

Time: July 24 (10:00-12:00)
1. lacks an automatic sprayer; primarily produces Tristar's sound box outer covers.
2. Mold warming machine: Used to reduce the watermark around the clamps (appearing around holes).
3. Nitrogen equipment: Reduces synaeresis issues (given thick sizing material).
4. Has not produced small-volume PC+ABS products.
5. If the mold is completed and revisions are requested, no additional charges will be applied.
6. Materials are procured through Tristar purchases, and preparation takes approximately 1 week; special materials require 3 weeks, and products are supplied to Tristar's electronic suppliers.
7. The usual opening cost for a 100T casting machine (24 hours) is 800 to 850 Yuan.
Time: July 24 afternoon, 1:30 to 5:00
1. Shortcoming: Material mixing and drainage issues; whether the proportion is confirmed by the customer, using a mix of raw material and drainage can lower the unit price.
2. General PC raw material price is 33-35 Yuan, ABS is 19 RMB per kg; raw material prices are not finalized, depending on model and performance specifications. Material selection typically takes 1 week, while special materials require 10 days.
3. A 100-ton machine's daily opening cost (24 hours) is 1,200 Yuan, with a cost of 0.55 Yuan per beer.
4. Mold opening time after blueprint confirmation: Typically 18 days, with a fastest time of 15 days for a 1-cavity mold; adding 3 cavities extends this to 20 days, making the mold opening time from 1 to 4 cavities 35 days.
5. Mold processing timeline for a 1-cavity mold:
1) Peripheral processing: 3 days
2) Fitting mold: 1 day
3) Province mold: 2 days
4) CNC processing: 3 days
5) Spark erosion: 3 days
6) Wire cutting: 2 days
7) Heat treatment
8) Material selection: 2 days
9) Total: 18 days
6. After confirming the blueprint, a 4-cavity mold opening takes 15 days, with model delivery from the order form taking an additional 15 days, which cannot be expedited.
7. After consultation, the other party quoted 21 days for a 4-cavity mold opening, guaranteeing a fastest time of 14 to 18 days if they arrange the mold and raw materials.
8. Unit prices of 0.3 RMB are high.
On July 25 (10:00-12:00), galvanizing factory meeting highlights:
1. Before galvanization, models with a thickness below 0.07UM cannot be guaranteed.
2. Partial galvanization will cover non-galvanized parts.
3. Plates with electrolysis but no chemical plating.
4. Models must undergo testing:
1) 90 bend tests (possibly destructive testing)
2) 72-hour salt mist test
3) Even color appearance desired
4) Solderability test
5. Models may be re-provided on July 27.
On July 25 afternoon, 1:30 to 4:30
1. Li Revertex factory developments:
- Li Precision Hardware Production Factory: Specializes in precise revertex, hardware mold design and manufacturing, hardware compression casting, and hardware ramming.