帮我翻译一段英文，不要翻译软件翻出来的
1.) How the whole procedure of casing machining works in detail. Setup and machining procedure for OMEGA and RDLO. Photos and movie (if possible - I check that).
2.) How may shifts KSB Halle is working for the casing machining?
3.) How about the detailed parameters of the 3 machines we already can see in the rough overview from Halle?
4.) How about the 2 tables and the setup time compare to the machining time?
5.) Do we need to consider some additional things next to the machine itself and the fixtures?
6.) How about the different tools in the machine and the machining times?
7.) How about the separated machining of casing and casing cover. How many times you need to fix the each part to fully machine it. How to guarantee the fitting of the inner machined part and the separated machined wholes?
8.) How about the casting quality of the casing coming from the own foundry? Do it create any problems at the time of machining compare to other suppliers?
9.) If there are some wholes in the casted casing. How to make sure that we don't waste any machining time at the time we notice that we need to scrap the part after finishing machining?
10.) What about the temperature in the workshop. In Shanghai it can be from -5 to 40 degree Celsius. Can we meet the required tolerances?
11.) How about the design of the fixtures. Did you asked for external help, who was the main responsible person within KSB Halle for that issue. How long it took from design until the fixtures are ready for machining?
2)。怎么可能转变为寝食难安哈里是套管加工吗?
三。)如何具体参数的3台机器,我们已经可以看到在粗糙的概要从哈里吗?
四。)如何设定时间2桌,与加工时间吗?
五。)我们需要考虑的一些附加的事物本身的机器旁的装置吗?
六。)如何在不同的机器和工具的加工时间吗?
7。)如何设计和套管分离机械覆盖。有多少次你需要修理的每个部分完全机。如何保证配件的加工和内在分离机械全部吗?
8。)如何对套管的铸件质量来自于自己的铸造吗?做这件事出任何麻烦的时候比其他供应商的加工吗?
9)。如果有全部的唯一套管。如何确保我们别再浪费时间在加工时,我们发现我们需要报废的部分完成后加工吗?
10)。什么样的温度。它可以从上海- 40℃。我们能达到要求的公差吗?
11)。如何设计的装置。你请求帮助,是外在的主要负责人对那个问题在寝食难安哈莉。花多长时间,从设计到灯架准备机加工呢?
