求VB按时间PING一个IP，并且显示速度。

Question

功能大概就像浩方，QQ对站平台房间速度检测那样

绿的就是很快，红的很慢，然后后面写出时间。

求原代码,或者方法。直接写这或邮箱

邮箱cyldq2486@163.com

求大家帮我，编写成功追分，相信咱分多。
这个我也找到了，没实例，写的也不全啊。。。

Answer 1

BAS Module 模块
把以下代码回到 BAS Module 模块:
Option Explicit
Private Const IP_SUCCESS As Long = 0
Private Const IP_STATUS_BASE As Long = 11000
Private Const IP_BUF_TOO_SMALL As Long = (11000 + 1)
Private Const IP_DEST_NET_UNREACHABLE As Long = (11000 + 2)
Private Const IP_DEST_HOST_UNREACHABLE As Long = (11000 + 3)
Private Const IP_DEST_PROT_UNREACHABLE As Long = (11000 + 4)
Private Const IP_DEST_PORT_UNREACHABLE As Long = (11000 + 5)
Private Const IP_NO_RESOURCES As Long = (11000 + 6)
Private Const IP_BAD_OPTION As Long = (11000 + 7)
Private Const IP_HW_ERROR As Long = (11000 + 8)
Private Const IP_PACKET_TOO_BIG As Long = (11000 + 9)
Private Const IP_REQ_TIMED_OUT As Long = (11000 + 10)
Private Const IP_BAD_REQ As Long = (11000 + 11)
Private Const IP_BAD_ROUTE As Long = (11000 + 12)
Private Const IP_TTL_EXPIRED_TRANSIT As Long = (11000 + 13)
Private Const IP_TTL_EXPIRED_REASSEM As Long = (11000 + 14)
Private Const IP_PARAM_PROBLEM As Long = (11000 + 15)
Private Const IP_SOURCE_QUENCH As Long = (11000 + 16)
Private Const IP_OPTION_TOO_BIG As Long = (11000 + 17)
Private Const IP_BAD_DESTINATION As Long = (11000 + 18)
Private Const IP_ADDR_DELETED As Long = (11000 + 19)
Private Const IP_SPEC_MTU_CHANGE As Long = (11000 + 20)
Private Const IP_MTU_CHANGE As Long = (11000 + 21)
Private Const IP_UNLOAD As Long = (11000 + 22)
Private Const IP_ADDR_ADDED As Long = (11000 + 23)
Private Const IP_GENERAL_FAILURE As Long = (11000 + 50)
Private Const MAX_IP_STATUS As Long = (11000 + 50)
Private Const IP_PENDING As Long = (11000 + 255)
Private Const PING_TIMEOUT As Long = 500
Private Const WS_VERSION_REQD As Long = &H101
Private Const MIN_SOCKETS_REQD As Long = 1
Private Const SOCKET_ERROR As Long = -1
Private Const INADDR_NONE As Long = &HFFFFFFFF
Private Const MAX_WSADescription As Long = 256
Private Const MAX_WSASYSStatus As Long = 128

Private Type ICMP_OPTIONS
Ttl As Byte
Tos As Byte
Flags As Byte
OptionsSize As Byte
OptionsData As Long
End Type

Public Type ICMP_ECHO_REPLY
Address As Long
status As Long
RoundTripTime As Long
DataSize As Long 注释：formerly integer
注释：Reserved As Integer
DataPointer As Long
Options As ICMP_OPTIONS
Data As String * 250
End Type

Private Type WSADATA
wVersion As Integer
wHighVersion As Integer
szDescription(0 To MAX_WSADescription) As Byte
szSystemStatus(0 To MAX_WSASYSStatus) As Byte
wMaxSockets As Long
wMaxUDPDG As Long
dwVendorInfo As Long
End Type

Private Declare Function IcmpCreateFile Lib "icmp.dll" () As Long

Private Declare Function IcmpCloseHandle Lib "icmp.dll" (ByVal IcmpHandle As Long) As Long

Private Declare Function IcmpSendEcho Lib "icmp.dll" (ByVal IcmpHandle As Long, ByVal DestinationAddress As Long, ByVal RequestData As String, ByVal RequestSize As Long, ByVal RequestOptions As Long, ReplyBuffer As ICMP_ECHO_REPLY, ByVal ReplySize As Long, ByVal Timeout As Long) As Long

Private Declare Function WSAGetLastError Lib "WSOCK32.DLL" () As Long

Private Declare Function WSAStartup Lib "WSOCK32.DLL" (ByVal wVersionRequired As Long, lpWSADATA As WSADATA) As Long

Private Declare Function WSACleanup Lib "WSOCK32.DLL" () As Long

Private Declare Function gethostname Lib "WSOCK32.DLL" (ByVal szHost As String, ByVal dwHostLen As Long) As Long

Private Declare Function gethostbyname Lib "WSOCK32.DLL" (ByVal szHost As String) As Long

Private Declare Sub CopyMemory Lib "kernel32" Alias "RtlMoveMemory" (xDest As Any, xSource As Any, ByVal nbytes As Long)

Private Declare Function inet_addr Lib "WSOCK32.DLL" (ByVal s As String) As Long

Public Function GetStatusCode(status As Long) As String

Dim msg As String

Select Case status
Case IP_SUCCESS: msg = "ip success"
Case INADDR_NONE: msg = "inet_addr: bad IP format"
Case IP_BUF_TOO_SMALL: msg = "ip buf too_small"
Case IP_DEST_NET_UNREACHABLE: msg = "ip dest net unreachable"
Case IP_DEST_HOST_UNREACHABLE: msg = "ip dest host unreachable"
Case IP_DEST_PROT_UNREACHABLE: msg = "ip dest prot unreachable"
Case IP_DEST_PORT_UNREACHABLE: msg = "ip dest port unreachable"
Case IP_NO_RESOURCES: msg = "ip no resources"
Case IP_BAD_OPTION: msg = "ip bad option"
Case IP_HW_ERROR: msg = "ip hw_error"
Case IP_PACKET_TOO_BIG: msg = "ip packet too_big"
Case IP_REQ_TIMED_OUT: msg = "ip req timed out"
Case IP_BAD_REQ: msg = "ip bad req"
Case IP_BAD_ROUTE: msg = "ip bad route"
Case IP_TTL_EXPIRED_TRANSIT: msg = "ip ttl expired transit"
Case IP_TTL_EXPIRED_REASSEM: msg = "ip ttl expired reassem"
Case IP_PARAM_PROBLEM: msg = "ip param_problem"
Case IP_SOURCE_QUENCH: msg = "ip source quench"
Case IP_OPTION_TOO_BIG: msg = "ip option too_big"
Case IP_BAD_DESTINATION: msg = "ip bad destination"
Case IP_ADDR_DELETED: msg = "ip addr deleted"
Case IP_SPEC_MTU_CHANGE: msg = "ip spec mtu change"
Case IP_MTU_CHANGE: msg = "ip mtu_change"
Case IP_UNLOAD: msg = "ip unload"
Case IP_ADDR_ADDED: msg = "ip addr added"
Case IP_GENERAL_FAILURE: msg = "ip general failure"
Case IP_PENDING: msg = "ip pending"
Case PING_TIMEOUT: msg = "ping timeout"
Case Else: msg = "unknown msg returned"
End Select

GetStatusCode = CStr(status) & " [ " & msg & " ]"
End Function

Public Function Ping(sAddress As String,
sDataToSend As String,
ECHO As ICMP_ECHO_REPLY) As Long

注释：If Ping succeeds :
注释：.RoundTripTime = time in ms for the ping to complete,
注释：.Data is the data returned (NULL terminated)
注释：.Address is the Ip address that actually replied
注释：.DataSize is the size of the string in .Data
注释：.Status will be 0
注释：
注释：If Ping fails .Status will be the error code

Dim hPort As Long
Dim dwAddress As Long

注释：convert the address into a long representation
dwAddress = inet_addr(sAddress)

注释：if a valid address..
If dwAddress <> INADDR_NONE Then

注释：open a port
hPort = IcmpCreateFile()

注释：and if successful,
If hPort Then

注释：ping it.
Call IcmpSendEcho(hPort, dwAddress, sDataToSend, Len(sDataToSend), 0, ECHO, Len(ECHO), PING_TIMEOUT)

注释：return the status as ping succes and close
Ping = ECHO.status
Call IcmpCloseHandle(hPort)

End If

Else:
注释：the address format was probably invalid
Ping = INADDR_NONE

End If

End Function

Public Sub SocketsCleanup()

If WSACleanup() <> 0 Then
MsgBox "Windows Sockets error occurred in Cleanup.", vbExclamation
End If

End Sub

Public Function SocketsInitialize() As Boolean

Dim WSAD As WSADATA

SocketsInitialize = WSAStartup(WS_VERSION_REQD, WSAD) = IP_SUCCESS

End Function

注释：--end block--注释：

--------------------------------------------------------------------------------------------

窗体代码
把以下代码回到窗体里
Option Explicit

Private Sub Command1_Click()

Dim ECHO As ICMP_ECHO_REPLY
Dim pos As Long
Dim success As Long

If SocketsInitialize() Then

注释：ping the ip passing the address, text
注释：to send, and the ECHO structure.
success = Ping((Text1.Text), (Text2.Text), ECHO)

注释：display the results
Text4(0).Text = GetStatusCode(success)
Text4(1).Text = ECHO.Address
Text4(2).Text = ECHO.RoundTripTime & " ms"
Text4(3).Text = ECHO.DataSize & " bytes"

If Left$(ECHO.Data, 1) <> Chr$(0) Then
pos = InStr(ECHO.Data, Chr$(0))
Text4(4).Text = Left$(ECHO.Data, pos - 1)
End If

Text4(5).Text = ECHO.DataPointer

SocketsCleanup

Else

MsgBox "Windows Sockets for 32 bit Windows " & "environments is not successfully responding."

End If

End Sub

这样的代码在网上非常的多，所以你可以使用百度好好的查一下，然后就可以得到你要的答案。

首先你要制定一个标准多少时间是快的标准，多少时间是慢的标准

（绿的就是很快，红的很慢，然后后面写出时间。）

然后判断返回的时间和你的标准进行比对，得出时间就可以了，关于速度的标

准，特别是某个站点的速度那是非常的困难，你得到时间就可以比较客观的知

道某个站点的速度了！！！